Water Heaters Installations
If you’re planning to upgrade your water heater, consider a tankless model. They’re more efficient than their tank-style counterparts, with lower operating costs.
A professional installs from west palm beach electrician your new unit and makes leak-free water, gas, and ventilation connections. Look for a plumber that can get local permits and understands your home’s code requirements.
Installation Location
The location of a tankless water heater has a direct impact on how well it performs. It’s important to select an ideal location that will minimize changes to your plumbing configuration, provide access to electrical power and be relatively close to all major water demands (showers, sinks and appliances). This will ensure that you have hot water when you need it and will minimize the time the water takes to travel from the heater to the demand source.
The installation of a new tankless water heater can be a simple process if you are familiar with plumbing and have the right tools. However, if you are not familiar with these tasks, or if you are not confident in your own plumbing skills, you should consider hiring a professional plumber to handle the task for you. This will save you time and money in the long run.
Before beginning the installation, make sure that you turn off your gas supply and the water supply to your old water heater. You should also shut off the power supply to your heater, if it has one. This will help you avoid any accidental damage to your new tankless water heater.
Once you have turned off the gas and water supplies to your existing water heater, it’s time to begin the installation process of your new tankless water heater. First, you will need to remove the existing water heater from your home’s walls. This is a fairly complicated process that involves disconnecting pipes, removing the old water heater and hauling it away. This can add a significant amount to your overall project cost.
When selecting a location for your tankless water heater, you should keep in mind that it should be located away from other combustible materials, such as paint or varnish. This will prevent fires from occurring if these materials come into contact with the hot water heater or its outlet pipe. You should also keep the tankless water heater at least two feet from HVAC equipment or pipes that drip, steam or have condensation.
You should also avoid placing the tankless water heater near children’s toys or other flammable materials. This will help protect your children from getting burned if they get too close to the heater or its outlet water pipe. Lastly, you should place the tankless water heater in an area that is protected from rain or other elements.
Fuel Type
While a tankless gas or electric water heater can cost more upfront than a traditional storage model, they can save you money on your energy bills over the long term. That’s because these units heat water only when it’s needed, eliminating standby energy losses that are common with storage tank models. Some models also eliminate the need for a pilot light, which is a source of wasted energy in gas-fired tankless units.
A tankless water heater has a heat exchanger that uses either a natural gas burner or an electric element to heat the water as it flows through the unit. You can control your hot-water flow with a faucet-mounted sensor, a remote controller or your smartphone. The system can also be tripped on and off by a timer, a motion sensor or a home automation system.
If you choose a gas model, you’ll need to have a new gas line installed. Increasing the diameter of your gas line from the meter should be handled by a licensed plumber, since it can require removing the existing pipe and replacing it with a new one.
Depending on where your tankless water heater is located, you’ll also need to provide insulation for the pipes leading to it. Failure to do so can lead to high energy costs due to heat loss. In addition, you may need to install a venting system or upgrade your electrical circuit breaker panel for the unit.
You’ll want to choose a fuel type for your tankless water heater that works best with your house’s energy needs. Electric tankless water heaters use less power than gas-powered models, but you’ll still need to have a reliable electricity source to operate your unit. If you plan to use your tankless water heater to heat an indoor pool or hot tub, you’ll want to opt for a natural gas model. This will ensure that your heater can keep up with your peak hot-water demand, even in warmer weather. If you’re not sure how much power you’ll need, you can hire a professional to run a load test on your house. The result will indicate the maximum gallons of hot water your house can produce in an hour, along with your system’s power consumption and the price of your fuel.
Pilot Light
If you are installing a new tankless water heater in place of an existing storage water heater, the first step is to shut off the main water supply. Once that is done, remove the old storage water heater and start preparing for the installation of the new unit.
First, make sure that the new unit is properly sized for your household's needs. A professional can help you determine the best size for your home. If you are replacing a gas water heater, it is important that the new gas line be properly sized and that your house has adequate ventilation. This is important because a gas tankless water heater produces a lot of carbon dioxide, which can be toxic in large quantities.
A professional will also help you decide whether or not a permit is required to install your tankless water heater. Some municipalities consider a tankless water heater a different type of project than a water heater replacement and may require a permit. A professional plumber will know the local building codes and permit requirements.
Next, you will need to run the wiring to your new water heater. It is recommended that you have an electrician perform this task unless you are a skilled and experienced DIY homeowner. If you are using an electric unit, then it should be connected to a separate electrical circuit breaker from the rest of your home. It is important to follow the manufacturer's instructions for connecting the wiring.
Finally, you will need to mount the new unit. The manufacturer's instructions should include a list of mounting locations for your specific unit. It is important to mount the unit in an area that is easy to access so that you can perform routine maintenance. It is a good idea to mount the unit on the wall near where you will use it most frequently.
A tankless water heater uses a pilot light to activate the combustion of fuel, such as natural gas or propane. These units are much more energy efficient than traditional tank water heaters, and they can save you money in the long run. However, it is important to understand how these units operate so that you can properly maintain them.
Installation Cost
Getting a tankless water heater installed is more expensive than replacing an existing unit, but it will save you money in the long run. The price of installation will depend on the type of unit you choose, where it will be placed, and what kind of energy source it is powered by. It is also important to remember that any electrical system will require a licensed electrician for proper hook-up, and gas units will need a professional plumber who has experience working with them.
For electric units, the installer will attach a new wiring box and circuit breaker to your home's power system and connect it to the heater. This will cost about $50 to $200, depending on the size of your home and the extent of the work required. For gas units, the plumber will need to install a larger line from your gas meter to your heater. Usually this means jumping up two sizes from a 1/2-inch to 1-inch line. This can be costly, and should only be handled by a licensed plumber.
All gas or propane-powered units will need to be vented. This can be done through a direct vent, which uses a chimney or pipe to send exhaust outside, or a power vent, which pulls air from inside and blows it outdoors using a fan. These will cost more than non-vented systems, and can add up to $150 to the total installation costs.
In addition to installing the new heater, you will need to install a new gas line and possibly a new venting system. In some cases, you may need to hire a carpenter for any drywall work associated with the project. This could add up to $100, depending on the carpentry rate in your area.
Other costs to consider include a new gas connector kit and a termination vent kit, which will cost $20-$40. Then, you will need to pay for any piping or insulation that is necessary in your installation location.
If you’re planning to upgrade your water heater, consider a tankless model. They’re more efficient than their tank-style counterparts, with lower operating costs. A professional installs from west palm beach electrician your new unit and makes leak-free water, gas, and ventilation connections. Look for a plumber that can get local permits and understands your home’s code…